This Wi-Fi-connected robotic pool cleaner designed for residential pools up to 50 feet. It scrubs and vacuums the floor, climbs the walls, cleans the waterline and captures both routine debris and finer particles in an extra-large, top-load multi-layer filter basket. Use the MyDolphin™ Plus app to schedule cleaning and select the cycle that matches your pool’s condition.
This model is built for pool owners who want complete surface coverage and connected controls without relying on the pool pump, skimmer or a booster system.
These core features combine easy handling, powerful scrubbing, automatic scheduling and convenient top-load filtration for routine pool care.
A lightweight design makes the cleaner easier to lift, carry, place in the pool and remove after cleaning.
The active brush helps loosen attached dirt and debris from pool surfaces before the cleaner vacuums it into the filtration basket.
Enhanced scrubbing power works across the pool floor, walls and waterline to support a more thorough clean.
Customize automatic weekly cleaning times so the cleaner can operate according to your pool maintenance routine.
Lift the filter basket from the top, empty the collected debris and rinse it without turning the cleaner over.
Connect the power supply, place the cleaner in the pool and start the cycle without a booster pump or permanent plumbing connection.
The cleaner operates independently from the pool’s circulation system and does not require a booster pump, suction line or permanent plumbing changes.
Place the power supply at the manufacturer-recommended safe distance, connect the floating cable and plug the unit into a suitable protected outlet.
Place the cleaner in the water, allow trapped air to escape and confirm that the robot settles fully onto the pool floor.
Start cleaning from the power supply or use the MyDolphin™ Plus app to choose compatible cycle and scheduling options.
Dealer note: product specifications and included accessories can change by production run or regional configuration. Confirm the current model number, filtration kit, warranty and in-store availability before purchase.
Compare pool compatibility, cleaning performance, connectivity and included equipment before deciding whether the Active 40 matches your pool.
The best model depends on how much control, filtration flexibility and cleaning power you need. This comparison highlights the practical differences buyers commonly evaluate before contacting a local dealer.
| Buyer Consideration | Active 30 | Active 40 | Active 60 |
|---|---|---|---|
| Pool coverage | Floor, walls and waterline for residential pools up to 50 feet. | Floor, walls and waterline for residential pools up to 50 feet. | Premium full-surface cleaning for pools up to 50 feet. |
| Filtration approach | Fine filter kit with an additional ultra-fine filter kit. | Extra-large multi-layer top-load basket for mixed debris. | Advanced top-load filtration with higher suction performance. |
| Cleaning cycles | Standard two-hour cleaning cycle. | Selectable 1.5, 2 and 2.5-hour cycles. | Enhanced cycle and control options for premium pool care. |
| Connected controls | MyDolphin™ Plus app and weekly scheduling. | MyDolphin™ Plus app, weekly scheduling and delay feature. | Premium connected controls and convenience functions. |
| Transport and cable | Caddy and 60-foot anti-tangle swivel cable. | Caddy and 60-foot anti-tangle swivel cable. | Caddy included; designed for buyers prioritizing premium performance. |
| Best fit | Buyers who want app control and interchangeable fine filtration. | Buyers who want flexible cycles and a convenient multi-layer basket. | Buyers who want the highest Active-series suction and premium features. |
Comparison note: model specifications and included accessories can change. Confirm the exact current configuration, model number and availability with Pool Place Easton before making a purchase decision.
Many performance concerns can be traced to filter loading, cable placement, blocked brushes or weak Wi-Fi coverage near the power supply.
Empty and rinse the filter, inspect the active brushes and tracks, and confirm the pool chemistry is balanced. A heavily loaded basket or slippery surface can reduce traction. Some step shapes, ledges and transitions may not be fully accessible to any robotic cleaner.
Extend only the cable length needed for the pool, straighten it before use and allow the anti-tangle swivel to move freely. Store the cable loosely rather than wrapping it tightly around the caddy.
Check Wi-Fi signal strength where the power supply is positioned, confirm that the mobile device and cleaner are using the supported network setup, and follow the current MyDolphin™ Plus pairing instructions. The cleaner can still be started from its power supply.
Rinse the multi-layer basket thoroughly and select the cycle that matches the pool condition. Heavy sediment, algae residue or unusually large debris loads may need a second cycle and supporting water-chemistry or manual maintenance.
The Active 40 offers full pool coverage, Wi-Fi connectivity, multi-layer filtration and an included caddy. Compare it with the DOLPHIN ACTIVE 60 when you want to review premium control, filtration, suction, pickup and warranty differences before buying.
Compare other models when your pool is smaller, your cleaning needs are simpler or you want to move to a more premium cleaner in the Dolphin Active range.
A lightweight entry model for smaller pools where automatic floor scrubbing is the main requirement.
View Active 10
A practical choice when you need more extensive cleaning coverage without the connected features of the Active 40.
View Active 20
Compare the Active 30 when you want strong residential cleaning performance at a lower feature level than the Wi-Fi connected Active 40.
View Active 30
A premium option for buyers comparing enhanced filtration, pickup convenience, suction performance and longer warranty coverage.
View Active 60This model is designed for residential pools with a maximum length of approximately 50 feet or 15 metres.
Yes. The cleaner is designed to scrub and vacuum the pool floor, climb the walls and clean along the waterline.
Yes. It connects through Wi-Fi and supports compatible controls and scheduling through the MyDolphin™ Plus mobile application.
Available cycle durations are approximately 1.5, 2 and 2.5 hours, allowing the user to choose among quicker, standard and enhanced cleaning.
No. It is a self-contained robotic cleaner with its own motor and filtration system, so it does not require a booster pump, suction line or connection to the pool’s filtration plumbing.
It uses an extra-large, top-load multi-layer filtration basket designed to capture routine debris and finer particles while remaining easy to remove and rinse.
Yes. The current manufacturer specification lists a caddy for transporting and storing the cleaner and its power supply. Confirm the included equipment with Pool Place Easton before purchase.
Yes. The approximately 60-foot floating cable includes an anti-tangle swivel to reduce twisting while the robot changes direction.
The current model is listed with a two-year manufacturer warranty. Ask Pool Place Easton to confirm coverage terms, registration requirements and local service support.
Contact Pool Place Easton at 78 Washington Street in North Easton, Massachusetts, to ask about current model availability, product comparisons, compatible filters and local support.
Contact Pool Place Easton for current stock information, cleaner comparisons, compatible filtration, warranty guidance and help choosing the right robotic pool cleaner for your pool.
